[ultimate_spacer height=”20″ height_on_tabs=”10″ height_on_tabs_portrait=”10″ height_on_mob_landscape=”10″ height_on_mob=”10″]

We are working on numerous projects along Globe for MEP, GSAS, PLANT ENGINEERING, LEED projects. Our project portfolio includes: Offshore Platforms, Onshore Process plants, Rail projects & Building Services sectors etc. We are looking for professionals who inherit our passion towards our services sectors to join our team.

We at Conserve, provide an Optimistic, Pro-active working environment for our people. We believe that team work and effective internal collaboration is the best way to produce best results. Join Conserve and Contribute our Vision. Mail your CV to [email protected]

Job Description:

Role and responsibility:

Auto plant job description Customize with key duties and responsibilities.

Designer and modellers

  • Equipment modelling and layout for process plants, yard pipe racks, tank frames and utilities.
  • Piping system modelling and layout generation for offshore and onshore of oil and gas, petro chemical plants and refinery plants.
  • Steel structural modelling and general arrangements of equipment, piping and ducting support structure.
  • HAVC duct roughing 3Dmodel and general arrangement drawings produce.
  • Clash deduction and feasibility analysis of piping, structural, equipment and ducting.
  • Holes and penetration management of piping and ducting of oil and gas projects.
  • General arrangement draft extractions of piping layout and key plan creation by using auto plant software.
  • Participation and handing model reviews & video conferences with the client / inter disciplines.
  • Make piping support, piping supports-drawing preparation for nonstandard supports.
  • Preparing Isometrics and general arrangement of piping.
  • Review the piping design documents (P&ID, Isometrics, GA’s, supports details, orientation drawings and vendor drawings).
  • Continuously updated project drawings and documents to final as built status.
  • Exposure in 3D model reviews, design reviews, clash checks using Navis works.
  • Develop the piping layout as per standards, required detailed engineering to be done.
  • Auto plant 3D problem solving, standardize ISO output & every 3D output.
  • Field dimensioning, preparation of site sketch preparation as built drawings.
  • Inter discipline / squad check of other department drawings.
  • Preparation of detail drawings extraction of equipment and steel structural arrangements.
  • MTO-Material Take Off extraction of piping layout equipment, and steel structural.
  • BOM-Bill of material extraction of entire piping systems and steel structural.
  • Preparation/checking of nozzle orientation drawings.

Essential of Administrator:

  • 3D administrator part very conversant with Auto plant 3D software.
  • Customize and update the primitives, standard items and vendor equipment based on the vendor catalogues.
  • Specification development of Piping, equipment and other items like HVAC, Electricals in the auto plant 3D.
  • MDS-multi discipline supports upload into the auto plant 3D.
  • Rectify the problems in the auto plant 3D software while doing the projects.
  • Attend the meetings and video conference for clarification with the client regarding project related quires and implementing the customized client’s desired items in the auto plant 3D.

Email: [email protected] kindly write your current CTC and expected CTC in your application  Visit us @ www.conservesolution.com

JD Code: JD – 303

Job Title: Architectural Draughtsman

Job Summary:

Diploma/B.E. Civil/Arch. Engineering graduate with good proficiency in AutoCAD drafting preferably having Architectural background.

You will need to work using the following Platforms:

  • Auto CAD.
  • MS Office.

Job Description:

  • Work with architect / Site engineer to ensure that construction project is in accordance with design specifications.
  • Analyze building specifications, codes, space to create architectural design.
  • Create architectural drawings based on building specifications, calculations and sketches.
  • Preparation of Bill of quantity.
  • Prepare shop drawings for finisher layouts
  • Preparation of section and elevation layouts
  • Preparation of block wall and partition wall details & layouts
  • Preparation of As-built layout.
  • Maintains and updates electronic and manual records of the company.
  • Ensures and maintains quality for finished drawings.

Technical Skills:

  • Education: Diploma / Bachelor
  • At least 2+ years of experience as an Architectural Draughtsman
  • Expert knowledge in Architectural
  • Advanced knowledge of MS Office and PDF Tools

Additional Skills (Skills / Abilities):

  • Must have basic knowledge in MEP, Structural and related field.
  • Applies Courage at work
  • Completes a quality job – right first time

Job location: Qatar. 

Email: [email protected] kindly write your current CTC and expected CTC in your application  Visit us @ www.conservesolution.com

 

 

 

 

 

 

 

 

JD Code: JD – 603

Job Title: MEP BIM Modeler

Job Summary:

Diploma/B.E. Electrical/Mechanical Engineering graduate with good proficiency in Revit MEP.

You will need to work using the following Platforms:

  • Revit
  • Navisworks
  • AutoCAD 2D

Job Description:

  • Modelling & coordination of building services to a high level of accuracy.
  • Ability to generate clean, smart and accurate drawings within Revit.
  • Work using our standard Revit MEP template.
  • Tag Revit MEP content and generate associated BIM schedules.
  • Creation of Revit families (preferred but not essential).
  • An ability to understand and apply British Standards to building services layout and coordination.
  • Generate general arrangement plans, diagrams, sections, elevations and schedule in Revit based on Tender / Contract drawing issued.
  • To provide procurement details of supplied needed.
  • To assist both internal and external team members in the development of construction documents and as-built documents creation.

Technical Skills:

  • Education: Diploma / Bachelor in Mechanical and Electrical Engineering
  • At least 2+ years of experience in Construction / Shop Drawings
  • Expert knowledge of Revit Tool and CAD
  • Advanced knowledge of MS Office and PDF Tools

Additional Skills (Skills / Abilities) :

  • Must have basic knowledge in Architecture, Structural and related field.
  • Expertise in Navis work Tool
  • Applies Courage at work
  • Completes a quality job – right first time

Job location: Qatar.

Email: [email protected] kindly write your current CTC and expected CTC in your application Visit us @ www.conservesolution.com

 

JD Code: JD – 302

Job Title: Mechanical Draughtsman

Job Summary:

Diploma/B.E. Mechanical Engineering graduate with good proficiency in AutoCAD drafting preferably having MEP background

You will need to work using the following Platforms:

  • Auto CAD.
  • MS Office.

Job Description:

  • Preparation of Mechanical services (eg. HVAC, Plumbing, Fire Protection) shop / detail drawings and as built drawings.
  • Preparation of MEP coordination drawings with other trade i.e. structural, Architectural, and electrical &interior design.
  • Ensures and maintains quality for finished drawings.
  • Preparation of Schematic diagram and isometric layouts.
  • Preparation of layouts according to the local and international Standards.
  • Preparation of duct sizing from airflow data.
  • Developing the Plan room layout and sectional detail.
  • Basic knowledge of different Mechanical equipment in term of function
  • Maintains and updates electronic and manual records of the company.

Technical Skills:

  • Education: Diploma / Bachelor in Mechanical Engineering
  • At least 2+ years of experience as a Mechanical Draughtsman
  • Expert knowledge of Mechanical System
  • Advanced knowledge of MS Office and PDF Tools

Additional Skills (Skills / Abilities) :

  • Must have basic knowledge in Electrical, Architecture, Structural and related field.
  • Applies Courage at work
  • Completes a quality job – right in the first time

Job location: Qatar.

Email: [email protected] kindly write your current CTC and expected CTC in your application  Visit us @ www.conservesolution.com

JD Code: JD – 301

Job Title: Electrical Draughtsman

Job Summary:

Diploma/B.E. Electrical Engineering graduate with good proficiency in AutoCAD drafting preferably having MEP background.

You will need to work using the following Platforms:

  • Auto CAD.
  • MS Office.

Job Description:

  • Preparation of Electrical services (eg. ELV, LV, Lighting) shop/detail drawings and as built drawings.
  • Ensures and maintains quality for finished drawings.
  • Preparation of single line diagram and equipment layouts.
  • Preparation of layout according to the local and international Standards.
  • Preparation of Cable Schedule and Cable tray sizing.
  • Developing the Technical room layout and sectional detail
  • Maintains and updates electronic and manual records of the company.

Technical Skills:

  • Education: Diploma / Bachelor in Electrical Engineering
  • At least 2+ years of experience as an Electrical Draughtsman
  • Expert knowledge of Electrical System
  • Advanced knowledge of MS Office and PDF Tools

Additional Skills (Skills / Abilities) :

  • Must have basic knowledge in Mechanical, Architecture, Structural and related field.
  • Applies Courage at work
  • Completes a quality job – right first time

Job location: Qatar.

Email: [email protected] kindly write your current CTC and expected CTC in your application  Visit us @ www.conservesolution.com

Role and responsibility:

Auto plant job description Customize with key duties and responsibilities.

Designer and modellers

  • Equipment modelling and layout for process plants, yard pipe racks, tank frames and utilities.
  • Piping system modelling and layout generation for offshore and onshore of oil and gas, petro chemical plants and refinery plants.
  • Steel structural modelling and general arrangements of equipment, piping and ducting support structure.
  • HAVC duct roughing 3Dmodel and general arrangement drawings produce.
  • Clash deduction and feasibility analysis of piping, structural, equipment and ducting.
  • Holes and penetration management of piping and ducting of oil and gas projects.
  • General arrangement draft extractions of piping layout and key plan creation by using auto plant software.
  • Participation and handing model reviews & video conferences with the client / inter disciplines.
  • Make piping support, piping supports-drawing preparation for nonstandard supports.
  • Preparing Isometrics and general arrangement of piping.
  • Review the piping design documents (P&ID, Isometrics, GA’s, supports details, orientation drawings and vendor drawings).
  • Continuously updated project drawings and documents to final as built status.
  • Exposure in 3D model reviews, design reviews, clash checks using Navis works.
  • Develop the piping layout as per standards, required detailed engineering to be done.
  • Auto plant 3D problem solving, standardize ISO output & every 3D output.
  • Field dimensioning, preparation of site sketch preparation as built drawings.
  • Inter discipline / squad check of other department drawings.
  • Preparation of detail drawings extraction of equipment and steel structural arrangements.
  • MTO-Material Take Off extraction of piping layout equipment, and steel structural.
  • BOM-Bill of material extraction of entire piping systems and steel structural.
  • Preparation/checking of nozzle orientation drawings.

Essential of Administrator:

  • 3D administrator part very conversant with Auto plant 3D software.
  • Customize and update the primitives, standard items and vendor equipment based on the vendor catalogues.
  • Specification development of Piping, equipment and other items like HVAC, Electricals in the auto plant 3D.
  • MDS-multi discipline supports upload into the auto plant 3D.
  • Rectify the problems in the auto plant 3D software while doing the projects.

Attend the meetings and video conference for clarification with the client regarding project related quires and implementing the customized client’s desired items in the auto plant 3D.

Job Summary:
We are seeking for talented young engineering aspirant who want to grow their career in Senior Architect  candidates who are willing to work in a challenging environment with an ability to provide innovative skill set.

 

Technical Skills:

  • Education: B.Arch/B.E-Civil/Diploma in Arch/Civil
  • 5 to 10 years of experience as a Architectural Filed

 

 

 

Click Here For More Details:

Job Summary:
We are seeking for talented young engineering aspirant who want to grow their career in Senior Architect  candidates who are willing to work in a challenging environment with an ability to provide innovative skill set.

 

Technical Skills:

  • Education: B.Arch/B.E-Civil/Diploma in Arch/Civil
  • At least 3+ years of experience as a Architectural Filed

 

 

 

Click Here For More Details:

Job Summary:
We are seeking for talented young engineering aspirant who want to grow their career in Senior Architect  candidates who are willing to work in a challenging environment with an ability to provide innovative skill set.

 

Technical Skills:

  • Education: B.Arch/B.E-Civil/Diploma in Arch/Civil
  • At least 3+ years of experience as a Architectural Filed

 

 

 

Click Here For More Details:

We are seeking for talented young engineering aspirant who want to grow their career in Electrical drafting and candidates who are willing to work in a challenging environment with an ability to provide innovative skill set.

Job Location: India (Trichy)/ GCC
Experience: Minimum 2+ years of experience as a Electrical BIM Modeler

Click Here For More details

Conserve is hiring Mechanical/Electrical/Civil engineers. The ideal candidate shall be given intensive training on HVAC/Plumbing/Electrical/Fire Fighting/Fire Alarm/ELV Systems. On the successful completion of training they will get placed as MEP trainer in our training division.

Location: Trichy / Chennai

Click Here For More details

Job Title: Mechanical Design Engineer

Qualification: BE/B.Tech Mechanical Engineering
Experience: 3-5 years

Job Title: Electrical Design Engineer

Qualification: BE/B.Tech Electrical Engineering
Experience: 3-5 years

Job Location: Qatar

Click Here For More details

Conserve is looking for Sustainability Engineers for their Trichy and Qatar office.

Qualifications: B Arch/BE Mech/Civil /Chemical/Environmental

Credentials: IGBC/GRIHA/LEED AP/GSAS/ESTIDAMA PQP

Experience: 2-3 years in Green Building Certification

Click Here For More details

A leading training center in Qatar is looking young dynamic professional preferably with engineering degree.



Click Here For More details

We are looking for a creative graphic designer who is passionate in design with conceptual skill. The candidate has to develop a project from concept to rough layout to prototype to complete design based on client’s inputs.



Click Here For More details

We are looking for a SEO Analyst, who is responsible for designing and implementing SEO, SEM and SMM strategies for clients. The candidate should possess exceptional attention to understand and support client’s requirements, to ensure their campaigns successful.



Click Here For More details

Conserve is hiring Mechanical/Electrical/Civil engineers. The ideal candidate shall be given intensive training on HVAC/Plumbing/Electrical/Fire Fighting/Fire Alarm/ELV Systems. On the successful completion of training they will place as MEP trainer in training division. Trainer will play training and project role for getting practical knowledge.



Click Here For More details

We are looking for creative web and mobile application developers to meet our IT requirements. The ideal candidate will be working on maintenance and enhancements of current projects as well as heading new projects right from project initiation, requirement gathering to final deployment and training.



Click Here For More details

Support the Engineering team on one or more projects using your expertise in Building Information Modeling

Job Location: India (Trichy)/ GCC
Experience: 2+ years of experience in Construction / Shop Drawings
Click Here For More details

Support the Engineering team on one or more projects using your expertise in Building Information Modeling.

Job Location: India (Trichy)/ GCC
Experience: 2+ years of experience as a BIM developer

Click Here For More details

We are seeking for talented young engineering aspirant. who are willing to work in a challenging environment with an ability to provide innovative skill set.

Job Location: India (Trichy)/ GCC
Experience: 2+ years of experience in Architecture field

Click Here For More details

We are seeking for talented young engineering aspirant who want to grow their career in Electrical drafting and candidates who are willing to work in a challenging environment with an ability to provide innovative skill set.

Job Location: India (Trichy)/ GCC
Experience: 3+ years of experience as a Mechanical Draughtsman

Click Here For More details